HOME ABOUT US SHIPPING & RETURNS FAQS CONTACT US
 
 


Micro-Cem Ultra Thin Overlay

Micro-Cem Ultra Thin Overlay

Micro-Cem™ Ultra-Thin Overlay is a two component system that blends a pre-packaged dry material with polymer to create a cementitious topping formulated for resurfacing structurally sound, non-moving concrete floors, walls, and exterior hardscapes. The cured product creates an abrasion resistant surface suitable for pedestrian and automobile traffic. It is an ideal system for restoring worn or color blemished concrete, or correcting construction errors when a smooth hard trowel finish is desired. Properly applied to clean and sound concrete, Micro-Cem™ Ultra-Thin Overlay is freeze/thaw resistant Micro-Cem™ develops a 28-day compressive strength of 5,800 psi (40.4 Mpa).

Micro-Cem™ is available in two formulations; Micro-Cem™ Fine and Micro Cem™ Coarse. Micro-Cem™ Fine and Micro-Cem™ Coarse are precise blends of finely ground minerals, cement, and polymer, which allow for ultra thin applications. They are pre-packaged, two component materials that are mixed on the jobsite. Application thickness for Micro-Cem™ Fine ranges from 1/32 inch (.75mm) to a maximum of 1/16 inch (1.5mm). Application thickness for Micro-Cem™ Coarse ranges from 1/16 inch (1.5mm) to a maximum of 3/16 inch (4.5mm).

Micro-Cem™ is packaged in cement gray and white and is available upon request with ample lead-time. Micro-Cem™ may be colored with a Uni-Mix® Color Pack. Please Refer to the Uni-Mix® Integral dry colorant color chart for available colors. Custom colors and colors selected from the Perma-Cast® Shake-on Color Hardener color chart can also be formulated with ample lead-time. Note: When Micro-Cem™ is mixed with a Uni-Mix® Color Pack, the cured color will not be an exact match to concrete colored with integral color or color hardener. Micro-Cem™ may be chemically stained after 72 hours of curing time by applying Perma-Cast® Sierra Stain™ or Elements™ Transparent Stain. Read the Perma-Cast® Sierra Stain™ and Elements™ Technical Data Sheets prior to installation.


Please select from the Options below
 Size and Type OptionsOur PriceQtyBuy
Course (Gray) - Requires 5 Quarts Micro-Cem Polymer) Course (Gray) - Requires 5 Quarts Micro-Cem Polymer) $27.56
Course (White) - Requires 5 Quarts Micro-Cem Polymer) Course (White) - Requires 5 Quarts Micro-Cem Polymer) $28.62
Fine (Gray) Requires 7.75 Quarts Micro-Cem Polymer Fine (Gray) Requires 7.75 Quarts Micro-Cem Polymer $27.56
Fine (White) Requires 7.75 Quarts Micro-CEM Polymer Fine (White) Requires 7.75 Quarts Micro-CEM Polymer $28.62
 
  Custom Crete Warehouse • 45 McDermott Road • North Haven, CT 06473 • 203-668-5341 • Email Us  
     
Privacy StatementTerms & Conditions