HOME ABOUT US SHIPPING & RETURNS FAQS CONTACT US
 
 


Micro-Cem Polymer

Micro-Cem Polymer

Micro-Cem™ Polymer is used as the primer for the Micro-Cem™ system. With both the Micro-Cem™ Coarse and Fine a double application of Micro-Cem™ polymer as a primer is required. To begin, apply an even coat of Micro-Cem™ Polymer to a clean and prepared sound substrate using a paint roller or bristle brush. Coverage is approximately 200 square feet per gallon (4.9 m²/L). Take care to protect adjacent surfaces from overlap or splash. When applying the Micro-Cem™ Polymer the initial coloring is white. After a few minutes the material will begin to soak into the surface and start to have a clear appearance. Once this process begins you must apply the second coat of polymer immediately. Do not allow the polymer to dry out completely. After the second coat of Micro-Cem™ Polymer is applied it must be coated with Micro-Cem™ Fine or Micro-Cem™ Coarse before the polymer dries. If the Polymer primer coat has dried before the Micro-Cem™ application, the Micro-Cem™ may not adhere to the substrate. If the primer dries prior to application the surface must be sanded and then the primer can be re-applied followed by the application of Micro-Cem™.


Please select from the Options below
 Size OptionsOur PriceQtyBuy
Micro-Cem Polymer - 5 Gallon Micro-Cem Polymer - 5 Gallon $90.10
 
  Custom Crete Warehouse • 45 McDermott Road • North Haven, CT 06473 • 203-668-5341 • Email Us  
     
Privacy StatementTerms & Conditions